So, the rectumfryer mount had snapped again.
The Euro 4's have it mounted on the back of the left hand toolbox, so out with the drill, and off with the toolbox. Although when it was off, I noticed the toolbox mounting points were very similar in distance apart to the holes in the reg/rec...
...almost but not quite.
Put the drill away, and get the hacksaw and file out.
Trial fit with the existing bolts...
...and then reassemble with some longer ones.
Bit fiddly, and the old earth connector doesn't reach, so made up a new dedicated earth cable, and ran it direct from the second earth point on the Motobatt. Also cut off and filed the remaining stabby bit of the old bracket. And whilst I was in the area, finally disconnected the side stand cutoff switch :-)
Bit of luck, that's the last time I have to find a home for it :-)
No comments:
Post a Comment